32 mm Blue and Black PE Pipe: 6, 10 and 16 ATÜ Prices
When comparing 32 mm blue and black polyethylene pipes, check outside diameter, the catalogue pressure class and the product specification together. The same colour or diameter does not make two pipes interchangeable on a project.
Explore the relevant options: 32 mm / 6 ATÜ coiled pipe options · 32 mm / 10 ATÜ coiled pipe options · 32 mm / 16 ATÜ coiled pipe options
The prices below were checked against the company list on 24 September 2026. The 100-metre column is a product subtotal calculated from the unit price, excluding VAT. Coil length, continuous-length supply and shipping are confirmed separately.
32 mm Blue and Black Pipe Price Comparison
| Model and Size | TRY/metre | 100 metres |
|---|---|---|
| 32 mm 6 ATÜ Blue PE Pipe | TRY 23.00 | TRY 2,300.00 |
| 32 mm 10 ATÜ Blue PE Pipe | TRY 33.00 | TRY 3,300.00 |
| 32 mm 16 ATÜ Blue PE Pipe | TRY 49.00 | TRY 4,900.00 |
| 32 mm 6 ATÜ Black PE Pipe | TRY 18.00 | TRY 1,800.00 |
| 32 mm 10 ATÜ Black PE Pipe | TRY 27.00 | TRY 2,700.00 |
| 32 mm 16 ATÜ Black PE Pipe | TRY 36.00 | TRY 3,600.00 |
For the listed 10 ATÜ class, blue pipe is TRY 33.00/m and black pipe TRY 27.00/m. The 100-metre examples total TRY 3,300.00 and TRY 2,700.00. Assess that TRY 600.00 difference against the project specification, pipe marking and technical data; price or colour does not establish equivalence.
What Does 32 mm Mean?
For this PE pipe range, 32 mm refers to nominal outside diameter. Internal diameter depends on wall thickness and affects the flow passage. Do not size a system using outside diameter alone. Match fittings to the outside diameter and verify pressure, material and application compatibility.
Choosing Between 6, 10 and 16 ATÜ
The table retains the class labels used in the company price list. Do not automatically equate an ATÜ label with another product’s PN rating. Permitted operating pressure must be established from the manufacturer’s data for the relevant standard, material, temperature and service conditions.
- Describe both running and shutdown conditions: pumps, elevation and any pressure transients belong in the system assessment.
- Check pipe and fitting limits together. A higher-rated coupling does not increase the capacity of a lower-rated pipe.
- For applications requiring certification, ask for current documentation covering the specific series and size. A company-level certificate does not establish every product’s suitability for every use.
Selecting Fittings for Blue and Black PE Pipe
Use a coupling for a straight joint, a female or male threaded adapter for a threaded transition, and an elbow for a change of direction. On an adapter for 32 mm pipe, “32 mm” and the thread size are separate specifications. The thread standard and sealing method must also match the installation instructions.
The New PN16 and Blue PN16 fitting pages separate product families, codes and sizes. When choosing parts for your pipe order, compare the marked size and written product code rather than relying on the catalogue photograph alone.
Planning Lengths and Delivery
State each continuous run as well as the total length: a 60 m + 40 m requirement differs from one continuous 100 m length. Plan unloading space, vehicle access and handling on site. Once the technical selection is complete, request separate pipe, fitting and delivery prices.
Explore Products and the Current Price List
Frequently Asked Questions
Why is the price difference between blue and black 32 mm pipe not enough to choose?
Price does not replace a technical specification. Compare declared material, class, wall thickness, marking and service conditions on the same basis. Then compare the total order cost.
Is 32 mm the internal diameter?
In this range it is nominal outside diameter. Internal diameter changes with wall thickness; use the selected product’s actual bore or wall thickness for hydraulic calculations.
Which coupling fits a 32 mm pipe?
Start with a coupling for 32 mm outside diameter, then verify pipe material, pressure conditions and the manufacturer’s assembly instructions. For a reducing coupling, specify both pipe outside diameters.
Does a PN16 coupling make the whole line suitable for 16 bar?
No. The line must be assessed against the permitted limits of the pipe, fittings, temperature and other equipment. One component’s rating does not apply to the whole system.
Does colour prove PE100 grade or drinking-water suitability?
No. Colour is an identification feature. Material grade and specific uses such as drinking water must be verified through marking, technical data and current supporting documents.
Is the 100-metre figure the price of a ready-made coil?
It is the unit price multiplied by 100. Confirm available coil length, stock and continuous-length supply in the quotation; the table does not guarantee availability.
Can the pipe be installed above or below ground?
Verify the intended installation for the selected series. Sunlight, temperature, impact, bedding and protection requirements differ. Colour or coiled supply alone does not approve an installation method.
Which technical details should accompany an order?
Specify blue or black series, 32 mm outside diameter, listed class, total and continuous lengths, application, jointing method and destination. Include the project specification if available.
Compare Products and Sizes
Request a written quotation stating the model, size, required length and destination.
