Trusted Hose & Pipe Manufacturer in Türkiye

Use the hose under operating conditions appropriate to its model; Before storing, drain water and protect from sun. Knit, layer and pressure values ​​vary depending on the series. Working pressure and burst pressure are different values; When choosing a product, take the technical information of the series as basis.

Consider the pressure class in the catalog together with the product's outer diameter, material declaration and project conditions. For PN, SDR and ATÜ expressions, refer to the product marking and technical sheet; temperature, line conditions and connection style influence the selection.

Send the model, size, total meter or number of rolls and the delivery city/district to our WhatsApp line. Wholesale discount, minimum order, payment and shipping conditions are specified in the written offer according to your request.

The catalogue lists the AC drain hose in a 5/8" size. Check the actual connection dimensions of the unit outlet and hose; a 16 mm label alone does not establish compatibility with every unit. Assess outdoor suitability against the specific product declaration.

Color or heavy/standard name alone does not indicate numerical vacuum strength. Compare internal diameter, spiral reinforcement, fluid, required vacuum and bending conditions with the technical information of the relevant series.

The material and flexibility properties of thermo series are evaluated according to the model. A specific freezing temperature or frost-free guarantee cannot be derived from the product name. When choosing for a cold environment, ask for the temperature range and storage instructions of the series.

The connection method is selected based on the outer diameter, pipe class, fitting suitability and project requirements. For the coupling or welded connection, the relevant manufacturer's application instructions must be followed; A single diameter threshold is not the rule for all applications.

A certificate of conformity is evaluated only for the product, standard and scope of validity specified on it. If you are going to order for drinking water or project specifications, request the documentation scope and technical sheet of the model; Do not assume a common life or fitness guarantee for all products.

The choice depends on plant spacing, row length, slope, water quality, filtration and the required emitter flow rate. Separate emitters can be fitted to plain pipe; integrated dripline has model-specific emitter spacing and flow rates. Not every dripline is pressure-compensating (PC). Match the product to the irrigation design and operating conditions.

The material of the spiral reinforcement varies depending on the product series. Compare products with steel wire or hard plastic coils based on vacuum, operating pressure, fluid and connection requirements. The reinforcement name alone is not a guarantee of full vacuum or electrical grounding suitability.

Weight per metre and wall thickness help compare products in the same class. Weight or a thick appearance alone does not establish pressure resistance; check actual dimensions, tolerances and declared performance together.

Assess flow rate, pipe length, elevation change, fittings, the actual internal diameter and the required outlet pressure together. The sizing calculator provides a preliminary diameter from flow rate and the selected water velocity; it does not replace checks of friction loss, the pump operating point or pressure class. Do not treat the nominal outside diameter as the internal diameter.

Check the drain connection against the installation instructions for the appliance and building drainage system. Pipe slope, kinks or blockages, the discharge location and any required trap or air gap depend on the application. A qualified installer should determine the suitable arrangement when connecting to a building drain; one trap type is not a universal solution for every unit.