Metal-Insert Male Threaded Elbow
Download product sheet (PDF)Changes direction while connecting to female-threaded equipment. Specify pipe outside diameter and male thread size together.
Available for bulk orders. Include the product code, size, quantity and delivery destination in your enquiry.
Request a Bulk-Order Quote
Ertunç Plastik · Bulk OrdersDimensions and product codes
Pipe connection dimensions are in mm; thread sizes marked with a double quote are in inches.
Pieces per bag reflects the catalogue packing quantity, not a minimum order quantity. Confirm your order quantity and packing format when requesting a quote.
| Product code | Size | Pieces per bag |
|---|---|---|
| KDD2020012000 | 20x1/2" | 180 |
| KDD2025034000 | 25x3/4" | 120 |
| KDD2032100000 | 32x1" | 75 |
| KDD2040114000 | 40x1 1/4" | 40 |
| KDD2050112000 | 50x1 1/2" | 20 |
| KDD2063200000 | 63x2" | 15 |
Application and Product Selection
A male-threaded elbow connects a PE run around a corner to female-threaded equipment. The male thread size is separate from the pipe diameter in mm; match both to the product code.
Select from the Metal-Insert Compression Fittings dimensions in this page’s product-code table. Do not assume another series offers the same size range.
Define the connection before ordering
- Reading the size
- Record the pipe diameter and nominal thread size separately. An inch-designated thread size is not a measured pipe bore.
- Matching and layout
- The male-threaded end connects to a compatible female-threaded part. For an elbow or tee, also show the position of the threaded outlet on the order sketch.
- An example from the catalogue
- Product code: KDD2020012000 · Size: 20x1/2"
This example identifies one catalogue row; use the code for your required size and state the quantity in your enquiry.
Assembly and Installation Planning
Plan the assembly order, body turning space and an unstressed pipe route together. Use a compatible thread-sealing method and tighten according to the instructions.
Bulk Orders and Quotation Details
Ertunç Plastik accepts bulk-order enquiries. Send the product code, size, quantity and delivery destination together.
Include pipe OD, male thread size and the location of the turn.
Stock, packaging, delivery and commercial terms are confirmed in the written quotation. For mixed sizes, list each code on a separate line.
Metal-Insert Male Threaded Elbow: application and model selection
A male-threaded elbow connects a PE run around a corner to female-threaded equipment.
At a corner, identify the components on both sides as well as the change of direction. A straight coupling, a size transition and a turn into threaded equipment are different selections. Review the elbow's placement alongside the size record and the space available for installation.
Read the catalogue size and series context
Verify the size and connection type at each end of the direction change. The elbow name alone does not establish the installation angle or matching connection types. Actual catalogue records for this model include 20×1/2", 40×1 1/4", 63×2". Read the complete size expression alongside the series identity; do not transfer the size range of another similarly named model to this one.
Product code, packaging and piece quotation
Use “the selected row's product code / the selected catalogue size” and requested pieces on each quotation line. Catalogue pack quantity is separate from requested quantity or minimum order. Confirm current piece price, stock, packaging and delivery in writing.
What should be confirmed before installation?
Confirm the conveyed fluid, temperature, operating and surge pressure, pipe or hose class and connection form against information for the selected product. A series name, appearance or another component's data does not establish suitability of the whole installation. Use the relevant instructions for tightening and sealing methods.
Related models and connection choices
Frequently asked questions
6 questions and answers covering size, use, technical checks and quotations.
Is a male-threaded elbow the same as a threaded nipple?
The connection arrangements differ. This fitting joins one PE pipe end to one threaded end at a corner; it does not have two threaded ends.
Which size matters when connecting to a valve?
Both valve thread size and standard, and the PE pipe OD, are required. One matching end does not confirm the other.
How do I choose the size?
Measure the PE pipe outside diameter in millimetres, then confirm the nominal inch size and thread standard at the metal threaded end. Metal alloy, temperature suitability and pressure rating require the product technical declaration.
How do I verify the pressure and temperature suitability?
Do not assign PN16 to this range based on the name of another series. Provide the product code, fluid, operating temperature and required pressure conditions; confirm suitability with a technical data sheet and written quote.
What information is needed for an order?
Specify the product code, series, connection sizes and quantity. Add the application, operating conditions and delivery address when requesting a written quote.
What should I check before installation?
The metal threaded end and mating thread must use compatible standards. Follow the product instructions for sealing, tightening and pipe-side assembly; a metal threaded end does not make the body suitable for excessive tightening.