Metal-Threaded Tapping Saddle
Download product sheet (PDF)A tapping saddle fitted around a PE main to provide a metal threaded outlet. Select the main pipe OD, listed from 32 to 110 mm, together with the outlet thread; available outlets vary by pipe size.
Available for bulk orders. Include the product code, size, quantity and delivery destination in your enquiry.
Request a Bulk-Order Quote
Ertunç Plastik · Bulk OrdersDimensions and product codes
Pipe connection dimensions are in mm; thread sizes marked with a double quote are in inches.
Pieces per bag reflects the catalogue packing quantity, not a minimum order quantity. Confirm your order quantity and packing format when requesting a quote.
| Product code | Size | Pieces per bag |
|---|---|---|
| PCM2032012000 | 32x1/2" | 200 |
| PCM2032034000 | 32x3/4" | 200 |
| PCM2040012000 | 40x1/2" | 125 |
| PCM2040034000 | 40x3/4" | 125 |
| PCM2050012000 | 50x1/2" | 50 |
| PCM2050034000 | 50x3/4" | 50 |
| PCM2050100000 | 50x1" | 50 |
| PCM2063012000 | 63x1/2" | 35 |
| PCM2063034000 | 63x3/4" | 35 |
| PCM2063100000 | 63x1" | 35 |
| PCM2075012000 | 75x1/2" | 30 |
| PCM2075034000 | 75x3/4" | 30 |
| PCM2075100000 | 75x1" | 30 |
| PCM2090012000 | 90x1/2" | 24 |
| PCM2090034000 | 90x3/4" | 24 |
| PCM2090100000 | 90x1" | 24 |
| PCM2110012000 | 110x1/2" | 18 |
| PCM2110034000 | 110x3/4" | 18 |
| PCM2110100000 | 110x1" | 18 |
Application and Product Selection
A tapping saddle with a metal threaded outlet creates a branch on a PE main. Main-pipe outside diameter and outlet thread size are separate specifications; do not choose the saddle body by the outlet size alone.
Select from the Metal-Insert Compression Fittings dimensions in this page’s product-code table. Do not assume another series offers the same size range.
Define the connection before ordering
- Reading the size
- Select the saddle body for the main pipe’s outside diameter and the outlet for the branch connection. For a double outlet, specify both branch requirements.
- Matching and layout
- Plan the branch location, gasket seat and drilling method to the product instructions. The product name does not establish suitability for tapping a pressurised main.
- An example from the catalogue
- Product code: PCM2032012000 · Size: 32x1/2"
This example identifies one catalogue row; use the code for your required size and state the quantity in your enquiry.
Assembly and Installation Planning
Plan saddle position, sealing surface and hole preparation according to the product instructions. Isolate the line safely and allow for the connected equipment’s clearance and loading.
Bulk Orders and Quotation Details
Ertunç Plastik accepts bulk-order enquiries. Send the product code, size, quantity and delivery destination together.
Specify main pipe OD, outlet thread and quantity for each code.
Stock, packaging, delivery and commercial terms are confirmed in the written quotation. For mixed sizes, list each code on a separate line.
Metal-Threaded Tapping Saddle: application and model selection
A tapping saddle with a metal threaded outlet creates a branch on a PE main.
For an irrigation branch from a main pipe, select the saddle body size separately from the outlet connection. Single or double outlet and bolted or clip-on model distinctions affect the layout. Describe access around the pipe, outlet directions and the equipment to be connected together.
Read the catalogue size and series context
Check pipe outside diameter, outlet thread and the catalogue outlet count together. For a double-outlet record, verify each outlet separately. Actual catalogue records for this model include 32×1/2", 63×1", 110×1". Read the complete size expression alongside the series identity; do not transfer the size range of another similarly named model to this one.
Product code, packaging and piece quotation
Use “the selected row's product code / the selected catalogue size” and requested pieces on each quotation line. Catalogue pack quantity is separate from requested quantity or minimum order. Confirm current piece price, stock, packaging and delivery in writing.
What should be confirmed before installation?
Confirm the conveyed fluid, temperature, operating and surge pressure, pipe or hose class and connection form against information for the selected product. A series name, appearance or another component's data does not establish suitability of the whole installation. Use the relevant instructions for tightening and sealing methods.
Related models and connection choices
Frequently asked questions
6 questions and answers covering size, use, technical checks and quotations.
Which diameter determines the tapping-saddle size?
The section surrounding the pipe matches the main pipe OD. The outlet’s inch thread size is selected separately for the mating component.
Does the word metal specify pressure class or alloy?
No. Verify material composition, operating conditions and any applicable documentation in the product’s technical data.
How do I choose the size?
Measure the PE pipe outside diameter in millimetres, then confirm the nominal inch size and thread standard at the metal threaded end. Metal alloy, temperature suitability and pressure rating require the product technical declaration.
How do I verify the pressure and temperature suitability?
Do not assign PN16 to this range based on the name of another series. Provide the product code, fluid, operating temperature and required pressure conditions; confirm suitability with a technical data sheet and written quote.
What information is needed for an order?
Specify the product code, series, connection sizes and quantity. Add the application, operating conditions and delivery address when requesting a written quote.
What should I check before installation?
The metal threaded end and mating thread must use compatible standards. Follow the product instructions for sealing, tightening and pipe-side assembly; a metal threaded end does not make the body suitable for excessive tightening.