How to Calculate Prices per Metre for Spiral and Suction Hoses
Accurate comparison in spiral suction hose; It considers diameter, gram/meter, body and spiral structure, vacuum need, roll length and usage condition together.
Explore the relevant options: Compare spiral hose models · 2" Suction Hose: Series, Prices and Pump Quotation Checklist
Short answer for spiral suction hose meter price
The price per meter of spiral suction hose does not change only because the diameter increases. Gram/meter value, wall thickness, spiral hardness, body composition, roll length and ability to maintain its form under vacuum may differ between two products of the same diameter. Therefore, when comparing prices, it is necessary to first equalize the product class and usage condition.
For the current price, the diameter option or price list on the product page should be used. Rather than giving a fixed figure, this guide explains how to read the quote, what information to request, and how choosing an underweight or overweight product affects the total cost.
7 Factors That Determine the Price per Metre
The first element is the actual inside diameter; The inch expression in the product name alone may not be sufficient for compatibility with the pump nozzle and fitting. The second element is the gram/meter value. The third and fourth elements are the body wall thickness and spiral structure. The fifth element is standard or heavy duty class, the sixth element is roll length, and the seventh element is order quantity and shipping method.
Color alone should not be used as a technical grade when requesting a quote. For yellow, green, red, transparent or opaque products, the absorbent or transmitting use, actual diameter, series and verified operating condition should be written together.
- Inner and outer diameter
- Gram/meter and wall thickness
- Spiral hardness and body structure
- Standard or heavy duty series
- Vacuum and working condition
- Roll length and order quantity
- Clamp, fitting, packaging and shipment
How to compare size "1–6"?
Inch value is the nominal size used in ordering. It guides the connection preparation in millimeter equivalents; However, due to production tolerance and hose structure, the actual inner diameter in the product table should be checked before purchasing.
The following values are nominal conversion reference; The selection of fitting or pump port is based on the verified inner diameter of the product.
| Nominal size | Millimeter reference | Check on order |
|---|---|---|
| 1" | 25.4 mm | Actual inner diameter and fitting outer diameter |
| 1 1/4" | 31.75 mm | Clamp spacing and connection length |
| 1 1/2" | 38.1 mm | Pump nozzle and suction requirement |
| 2" | 50.8 mm | Flow rate, suction line and bend |
| 3" | 76.2 mm | Vacuum, roll size and handling |
| 4" | 101.6 mm | Application, connection and working condition |
| 5" | 127 mm | Standard/heavy series and pump compatibility |
| 6" | 152.4 mm | Line layout, vacuum and shipment |
Why are standard series and heavy duty series not the same price?
The standard series may be preferred for lighter services under suitable conditions declared by the manufacturer. Heavy duty series may have different body and spiral structure depending on more difficult suction, field movement or external impact. The decision should not be made just by looking at the product name.
Unnecessarily heavy product may increase initial cost and bearing burden; Insufficient series may cause crushing, bending, leakage or early replacement costs. The correct comparison is made with verified technical data on the same diameter and roll length.
Difference between suction, discharge, transparent and opaque spiral hose
The suction hose operates under negative pressure on the suction side of the pump; The body must maintain its form without collapsing. The discharge hose encounters a different load in the pump outlet or flow direction. These two tasks are not automatically interchangeable.
The transparent body can facilitate visual monitoring of the flow; The opaque body can be chosen for other uses and environmental conditions. Color, transparency or appearance alone are not evidence of vacuum or compressive strength. The series and usage declaration in the product leaflet should be checked.
How do meter, roll and wholesale price compare?
Meter price compares quickly need short; The roll price should be evaluated together with the total roll length, wastage and number of inserts. The cut piece and the closed roll may not have the same packaging, workmanship and shipping conditions.
For wholesale orders, only the discount rate should not be asked. How many rolls from the same series, length of each roll, color, diameter, packaging, delivery city and required date must be stated in writing. So different offers can be truly compared.
How do clamps, fittings and shipping affect the total cost?
If the hose does not fit the pump mouth, an intermediate fitting, reducer or different clamp may be required. Each additional point increases installation time and leak control. Therefore, the hose price and the fittings should be considered in the same order list.
In large diameter rolls, volume and unloading condition are also important. If how the roll will be unloaded from the vehicle, how it will be transported to the site and whether it will be cut or not will be discussed at the proposal stage, the surprise cost will be reduced.
What information should be sent for an accurate quote?
It is not enough to just write '5 yellow hose' when requesting a quote. It should be stated whether the use is pump suction or delivery line, the nature of the liquid, diameter, total length, roll preference, field movement and connection size.
Values should not be estimated for work requiring operating pressure, vacuum, temperature or chemical compatibility; Current technical data sheet and manufacturer confirmation should be requested.
- Usage area and fluid
- Suction or outlet side of the pump
- Nominal and actual connection diameter
- Total meter and roll preference
- Standard or heavy duty requirement
- Delivery city and target date
Frequently Asked Questions
How does the price of a spiral suction hose meter vary?
The meter price is determined by the diameter, gram/meter, wall thickness, spiral and body structure, standard or heavy duty class, roll length and order quantity. When comparing two products that appear to have the same diameter, the actual inner diameter and verified condition of use should be equalized.
Why is the price of 5 suction hose different from 4 hose?
As the diameter increases, the material used in a meter, roll volume and transport condition may change. But decisions are not made based on diameter alone; 5" whether the product is standard or heavy, gram/meter value and vacuum need also affect the price.
Is the suction hose of 6 sold by the meter or by the roll?
Sales format may be by the meter, cut piece or closed roll, depending on stock and product series. The offer must clearly state the roll length, the total required length and whether cutting is required.
What is the difference between standard and heavy suction hose?
The difference is not just weight or color. Body thickness, spiral structure, field movement and usage condition declared by the manufacturer may vary. Heavy series may be required in difficult suction lines; The selection must be made with current product data.
Will the price of yellow, green and transparent spiral hose be the same?
Color or transparency alone is not a price class. If the absorbing or transmitting function of the product, series, diameter, weight, body and spiral structure are not equal, prices cannot be directly compared.
Can the suction hose and discharge hose be used in the same place?
It is not always used. The suction hose is selected according to the negative pressure on the suction side of the pump, and the discharge hose is selected according to the conditions on the outlet side of the flow. They should not be used interchangeably without verifying that both tasks are clearly appropriate in the product declaration.
Why is the gram/meter value important in spiral hose?
Gram/meter gives an idea about the amount of material when comparing products in the same diameter and series. It is not a quality score alone; should be read in conjunction with wall thickness, spiral arrangement, flexibility and the manufacturer's operating declaration.
Is the meter price or the roll price more advantageous?
It depends on the length you need. Meters cut in short work can reduce wastage; For continuous use or on multiple lines the closed roll may be more tidy. The remaining parts, number of attachments, packaging and shipping should also be added to the total cost.
Is a vacuum hose the same as a standard spiral hose?
No, not every spiral-looking hose is suitable for vacuum service. The hose must not collapse under negative pressure during pump suction; This suitability must be verified from the manufacturer's current technical data.
Are clamps and fittings included in the spiral hose price?
Usually hose and fittings are separate items; However, the offer condition may change. If the need for hose, clamp, fitting, reduction and assembly are asked in the same list, the total cost is deemed correct.
How to get the price for wholesale spiral hose orders?
Product series, color, diameter, number of rolls, roll length, area of use, delivery city and date are reported together. Writing only total meters may lead to confusion between different product classes.
Is pump information required for a suction hose quote?
Yes. The connection diameter of the pump, suction side, line length, level difference and the liquid carried may affect the selection. If the technical conditions are not known, the product should not be selected just by looking at the photo or price.
Which fitting does the "1" spiral hose fit into?
"1" nominally corresponds to the reference 25.4 mm; however, for fitting selection, the actual inner diameter of the hose and the outer diameter of the fitting must be measured. Orders should not be made based on inch name alone without checking the product tolerance and connection type.
How to declare working condition on roll order?
Fluid, suction or delivery duty, pump and connection diameter, total line length, field movement, temperature and vacuum requirement, if any, are sent in writing. Uncertain technical values are not estimated; Confirmation is requested from the manufacturer.
Let's determine the appropriate product and size together
Write the diameter, length, area of use and delivery city; Request a quote with up-to-date product information.